1x Axon synapse hrb990 48x32 channel re-embedder, with a 16 channel embedder with digital audio in / out
Comes with options
- Dual video input
- DMB- DO (digtial out)
- DM-A = DI audio (Digital in audio)
From Axon
The G/HRB990-950-550 is a 48x32 channel re-embedder, with a 16 channel embedder (2x 8 channels in 2 individual SDI streams), 4 AES/EBU or analog outputs, and 4 AES channels to the Synapse ADD-ON bus. The source audio channels can be derived from 2 x 16 channel embedded domain streams, 4 AES/EBU or analog physical audio inputs and 8 channels from the Synapse bus The HRBxx0 can be future upgraded to GRBxx0. This allows for staged implementation of HD infrastructures and spread the cost over multiple budget years. Features 2 SDI inputs (with auto switch on carrier loss, and switch back function) 2 SDI outputs (2x1 or 2x2 function) Compatible with the following input formats (auto selecting) (1080p only for GXX): 1080p59.94 1080p50 1080i59.94 1080i50 1080p29.97 1080p25 1080p23.98 720p59.94 720p50 SD525 SD625 Dual offset VIDEO delay adjustable between 0 and 500ms Dual (TWINS) or single channel SDI mode when sources are clock locked (not phase locked*) 4 AES/EBU inputs with sample rate converter (available with 110 Ohm and 75 Ohm inputs), or 4 analog inputs (available with balanced or unbalanced connectors). 4 AES/EBU outputs or 4 analog outputs. AES/EBU inputs accept synchronous streams like Dolby E and asynchronous up to 192kHz sampling via the built in Sample Rate Converters. Auto SRC-off for bitstream sources like Dolby E 4 extra AES/EBU inputs through the Synapse bus 7 presets that configure all I/O channels. controlled by GPI or ACP (Cortex) S2020 metadata insertion from an external source Append and overwrite modes Audio level and phase control Audio offset delay up to 5000 ms Transparent for ATC time code RP188, RP196, RP215 Locks to Tri-level, Bi-level syncs or SDI input Full control and status monitoring through the front panel of the SFR04/SFR08/SFR18 frame and the Ethernet port (ACP) Optional 1 or 2 fiber inputs, 1 or 2 fiber outputs or a fiber in and output (replacing 1 SDI in and output) on the I/O panel Optional relay bypass (BHX18 or BHX18D) * (In dual mode, or 2-SDI mode the sources need to be running on the same clock, the phase is not critical)
