Audionics emu 12way iec mdu with sequential delay and ip control
The eMu is a twelve output mains distribution unit with an embedded web server to provide IP control of the unit.
The master unit contains the embedded web server, which can also control up to seven slave units, connected to it via RS485 serial link. Note that the Neutrik mains inlet and IEC mains outlets are not meant to be disconnected under load as thay have no breaking capacity.
Switch off the load before removing connectors to maximise connector life. Features Sequential Switch On -
Each MDU can be set up to have sequential switch on to prevent switch on power surge. Power Shedding - Each output can be programmed to switch off when the MDU is being powered from a UPS. Remote Control - All outputs can be switched on or off via the embedded web server. Power Cycling - Outputs can be cycled (switched off for 5 seconds, then power switched back on) Output Monitoring - Front panel and web monitoring of status of output and fuse. Email Alerts - MDUs can be programmed to send email alerts when powered from UPS. Each output can be programmed to send an email on detection of a fuse failure